An acoustic model is used in automatic speech recognition to represent the relationship between an audio signal and the phonemes or other linguistic units that make up speech. The model is learned from a set of audio recordings and their corresponding transcripts. It is created by taking audio recordings of speech, and their text transcriptions, and using software to create statistical representations of the sounds that make up each word. == Background == Modern speech recognition systems use both an acoustic model and a language model to represent the statistical properties of speech. The acoustic model models the relationship between the audio signal and the phonetic units in the language. The language model is responsible for modeling the word sequences in the language. These two models are combined to get the top-ranked word sequences corresponding to a given audio segment. Most modern speech recognition systems operate on the audio in small chunks known as frames with an approximate duration of 10ms per frame. The raw audio signal from each frame can be transformed by applying the mel-frequency cepstrum. The coefficients from this transformation are commonly known as mel-frequency cepstral coefficients (MFCCs) and are used as an input to the acoustic model along with other features. Recently, the use of convolutional neural networks has led to major improvements in acoustic modeling. == Speech audio characteristics == Audio can be encoded at different sampling rates (i.e. samples per second – the most common being: 8, 16, 32, 44.1, 48, and 96 kHz), and different bits per sample (the most common being: 8-bits, 16-bits, 24-bits or 32-bits). Speech recognition engines work best if the acoustic model they use was trained with speech audio which was recorded at the same sampling rate/bits per sample as the speech being recognized. == Telephony-based speech recognition == The limiting factor for telephony based speech recognition is the bandwidth at which speech can be transmitted. For example, a standard land-line telephone only has a bandwidth of 64 kbit/s at a sampling rate of 8 kHz and 8-bits per sample (8000 samples per second 8-bits per sample = 64000 bit/s). Therefore, for telephony based speech recognition, acoustic models should be trained with 8 kHz/8-bit speech audio files. In the case of voice over IP, the codec determines the sampling rate/bits per sample of speech transmission. Codecs with a higher sampling rate/bits per sample for speech transmission (which improve the sound quality) necessitate acoustic models trained with audio data that matches that sampling rate/bits per sample. == Desktop-based speech recognition == For speech recognition on a standard desktop PC, the limiting factor is the sound card. Most sound cards today can record at sampling rates of between 16–48 kHz of audio, with bit rates of 8- to 16-bits per sample, and playback at up to 96 kHz. As a general rule, a speech recognition engine works better with acoustic models trained with speech audio data recorded at higher sampling rates/bits per sample. But using audio with too high a sampling rate/bits per sample can slow the recognition engine down. A compromise is needed. Thus for desktop speech recognition, the current standard is acoustic models trained with speech audio data recorded at sampling rates of 16 kHz/16 bits per sample.
CloudHealth Technologies
CloudHealth Technologies, now CloudHealth by VMware, is a software company based in Boston, Massachusetts. The company provides cloud computing services related to cost management, governance, automation, security, and performance. == History == CloudHealth Technologies was founded by Joe Kinsella in 2012. Dan Phillips joined as CEO and co-founder in late 2012, and Dave Eicher joined as co-Founder in January 2013. In May 2016, the company announced plans to expand from its Boston headquarters with branch offices in San Francisco, London, Washington, D.C., Sydney, Amsterdam, Tel Aviv, and Singapore. Headquarters moved in Boston from Fort Point to 100 Summer Street in the Spring of 2018, tripling in square footage. In September 2017, Tom Axbey—who was previously at Rave Mobile Safety—joined as the new CEO and President. VMware announced its intention to acquire CloudHealth Technologies on August 27, 2018. The acquisition is "part of the information technology company's continued push into cloud-based software services" according to Reuters. The deal closed on October 4, 2018, and was reported to be in excess of $500 million. == Technology == Delivered through a software as a service (SaaS) model, CloudHealth Technologies's platform collects and analyzes data from cloud computing services and other IT environments so clients can report on costs, inform their business models, and project future trends. CloudHealth Technologies is compatible with Amazon Web Services, Microsoft Azure, Google Cloud Platform, multicloud, and hybrid cloud environments. CloudHealth Technologies has received Amazon Web Services(AWS) Education Competency status, AWS Migration Competency status and achieved SOC 2 Type 2 Compliance. == Funding == As of June 2017, CloudHealth Technologies has raised a total of $85.7 million through four rounds of funding. In March 2013, CloudHealth Technologies announced that it had secured $4.5 million in Series A funding. This round was led by .406 Ventures and Sigma Prime Ventures. In January 2015, CloudHealth Technologies secured $12 million in Series B funding. This round was led by Scale Venture Partners, .406 Ventures, and Sigma Prime Ventures, and was followed by a $3.2 million extension round. In May 2016, CloudHealth Technologies announced $20 million in Series C funding, led by Sapphire Ventures, .406 Ventures, Scale Venture Partners and Sigma Prime Ventures. In June 2017, CloudHealth Technologies secured $46 million in Series D funding led by Kleiner Perkins Caufield & Byers with participation from Meritech Capital Partners, Sapphire Ventures, 406 Ventures, and Scale Venture Partners. == Competition == As of March 2023, CloudHealth Technologies competes with Cloudability by Apptio and CloudCheckr by NetApp.
Microsoft Whiteboard
Microsoft Whiteboard is a free multi-platform application, as well as an online service and a feature in Microsoft Teams, which simulates a virtual whiteboard and enables real-time collaboration between users. == Overview and features == Microsoft Whiteboard allows users to draw on a virtual whiteboard using input methods such as a stylus pen or a mouse and keyboard, and write down notes, draw connections between shareable ideas, and interact in real time. Microsoft Whiteboard is available to download on the following platforms and devices: Microsoft Windows (on Windows 10 or above) Android Apple iOS Surface Hub devices It is also available on the web and as a feature in Microsoft Teams. Microsoft Whiteboard allows users with Microsoft accounts to view, edit, and share whiteboards using the provided tools and options. The feature set includes tools for drawing, shapes, and media. Drawing in Microsoft Whiteboard is called inking. It works both on mobile devices and computers. The inking toolbar has customizable pencils, a ruler, a highlighter, an eraser, and an object selector. Whiteboard can recognize shapes drawn by hand and straighten them. Holding the Shift key on a computer while inking draws straight lines. Microsoft Whiteboard has keyboard shortcuts for some functions. Additional features include inserting sticky notes, text boxes, stickers, as well as images. Grid lines and colors are adjustable. Different templates can be inserted into the whiteboard. Users can also share their reactions. A feature limited to boards created in Microsoft Teams, is the ability to make them read-only; other participants from the meeting cannot edit them. == Reviews == PC Magazine gave Microsoft Whiteboard a score of 3.5 out of 5, praising the app's free availability and plentiful templates. It compared it to other, paid whiteboarding solutions, and concluded that Microsoft offers the best free one. Some of the cons, described by PCMag, include the inability to view boards without a Microsoft account and the inability to create custom templates.
Brill tagger
The Brill tagger is an inductive method for part-of-speech tagging. It was described and invented by Eric Brill in his 1993 PhD thesis. It can be summarized as an "error-driven transformation-based tagger". It is: a form of supervised learning, which aims to minimize error; and, a transformation-based process, in the sense that a tag is assigned to each word and changed using a set of predefined rules. In the transformation process, if the word is known, it first assigns the most frequent tag, or if the word is unknown, it naively assigns the tag "noun" to it. High accuracy is eventually achieved by applying these rules iteratively and changing the incorrect tags. This approach ensures that valuable information such as the morphosyntactic construction of words is employed in an automatic tagging process. == Algorithm == The algorithm starts with initialization, which is the assignment of tags based on their probability for each word (for example, "dog" is more often a noun than a verb). Then "patches" are determined via rules that correct (probable) tagging errors made in the initialization phase: Initialization: Known words (in vocabulary): assigning the most frequent tag associated to a form of the word Unknown word == Rules and processing == The input text is first tokenized, or broken into words. Typically in natural language processing, contractions such as "'s", "n't", and the like are considered separate word tokens, as are punctuation marks. A dictionary and some morphological rules then provide an initial tag for each word token. For example, a simple lookup would reveal that "dog" may be a noun or a verb (the most frequent tag is simply chosen), while an unknown word will be assigned some tag(s) based on capitalization, various prefix or suffix strings, etc. (such morphological analyses, which Brill calls Lexical Rules, may vary between implementations). After all word tokens have (provisional) tags, contextual rules apply iteratively, to correct the tags by examining small amounts of context. This is where the Brill method differs from other part of speech tagging methods such as those using Hidden Markov Models. Rules are reapplied repeatedly, until a threshold is reached, or no more rules can apply. Brill rules are of the general form: tag1 → tag2 IF Condition where the Condition tests the preceding and/or following word tokens, or their tags (the notation for such rules differs between implementations). For example, in Brill's notation: IN NN WDPREVTAG DT while would change the tag of a word from IN (preposition) to NN (common noun), if the preceding word's tag is DT (determiner) and the word itself is "while". This covers cases like "all the while" or "in a while", where "while" should be tagged as a noun rather than its more common use as a conjunction (many rules are more general). Rules should only operate if the tag being changed is also known to be permissible, for the word in question or in principle (for example, most adjectives in English can also be used as nouns). Rules of this kind can be implemented by simple Finite-state machines. See Part of speech tagging for more general information including descriptions of the Penn Treebank and other sets of tags. Typical Brill taggers use a few hundred rules, which may be developed by linguistic intuition or by machine learning on a pre-tagged corpus. == Code == Brill's code pages at Johns Hopkins University are no longer on the web. An archived version of a mirror of the Brill tagger at its latest version as it was available at Plymouth Tech can be found on Archive.org. The software uses the MIT License.
1 Second Everyday
1 Second Everyday (1SE) is an application developed by Cesar Kuriyama. The application allows the user to record one second of video every day and then chronologically edits (mashes) them together into a single film. It is compatible with iOS and Android. The idea of the application was developed by Kuriyama's 1 Second Everyday — Age 30 video. The application was launched in January 2013. 1 Second Everyday played a part in the plot of Chef and also became the inspiration for the 2014 short animated clip Feast. == Background == === Kuriyama's video === In February 2011, when Cesar Kuriyama turned 30, after saving money, he quit his job in an advertising firm and took a year off to travel. During this time, he started working on a project he called 1 Second Everyday. As part of the project, every day he recorded one second of video – something that was supposed to help him remember that day. He started the project because he was frustrated with his memory. He planned to stockpile the 365 one-second clips into one film to serve as a memento of his year. While working on the project Kuriyama realized that recording one second every day impacted the decisions he made in a positive way. After a year he made a 365-second clip out of his recordings. The video called 1 Second Everyday – Age 30, went viral. According to Kuriyama, he was initially inspired to take a year off from work by a TED talk given by Stefan Sagmeister called "The Power of Time Off." Kuriyama also delivered a TED talk about 1 Second Everyday in 2012 at TED 2012 in Long Beach California. === Kickstarter campaign === After completing his own video, Kuriyama decided to develop an application that would allow the users to record one second every day and compile their own videos. He developed a prototype of the application and then in 2012, he launched a Kickstarter campaign to raise funds for completing the application. The campaign became one of the most backed app campaigns in the history of Kickstarter. It was backed by 11,281 backers who pledged a total of $56,959 on an initial goal of $20,000. Following the completion of the Kickstarter campaign, he partnered with an application design studio in Brooklyn to develop the application. 1 Second Everyday was released two weeks after the completion of its Kickstarter campaign. == Application == The application was released for iOS on 10 January 2013. An Android-compatible version of the application was developed later. Using it, the user can record the videos in the application or they can select one second portions from their libraries. 1 Second Everyday dates every snippet. The user can also set alarms to remember to record their daily video. In order to compile a video, the user selects the seconds they want and the application creates a compilation video. The user can keep multiple timelines. It also allows users to post directly on social networks. The main interface in 1 Second Everyday is a calendar, which shows the user which days have snippets and which they can still fill in. In the beginning, 1 Second Everyday restricted the recording to one second. However, the developers later released Super Seconds, which allowed users to record an additional half a second video. In 2014, 1 Second Everyday Crowds was launched, which is an area in the application featuring compilations of second clips from different users. == In the media == The Kickstarter campaign of 1 Second Everyday was featured in Entrepreneur's 3 Innovative Tech Startups on Kickstarter Right Now in 2012. The application was featured in The New York Times, The Washington Post, Gawker and other media outlets. By the end of the launch day, it was in Top 10 Free Apps on App Store. It was also selected as the App of the Week on GeekWire in 2013. Several other one-second compilation videos were also posted on the Internet after Kuriyama's video gained media attention. Sam Cornwell, an English photographer documented his son Indigo's growth using a montage of one-second iPhone clips. He shot these clips every single day from the moment of birth right up to the baby's first birthday. According to Cornwell, he was inspired by Kuriyama's project. The video of Cornwell's son gained considerable media attention after it was posted on YouTube. Save the Children also made a video commercial based on a similar format that showed a British girl oblivious of the Syrian war end up being a refugee. 1SE was a finalist for the Fast Company Innovation by Design Award in 2015, but lost to Google Maps. In 2015, Google Android created a gallery, Leap Second 2015, with the help of Droga5 and Kuriyama. The gallery showcased how people around the world enjoyed the one extra second of their lives. Through the 1 Second Everyday app available at Google Play, people were able to submit their extra second, which were then vetted and added to the gallery. The viewers were able to view other celebratory seconds from around the world as well as searching for them using different hashtags.
Carrenza
Carrenza was a cloud-computing company based in London, United Kingdom. The company was acquired by Six Degrees Technology Group in 2016. == Operations == Carrenza was a UK-based IT company that provides Cloud computing technologies. It offered a range of public cloud, private cloud and hybrid cloud services, including Infrastructure as a Service (IaaS), Platform as a Service (PaaS), enterprise application integration and system integration. Carrenza partnered with several enterprise IT providers and was an accredited VMware Enterprise Service Partner and HP (Hewlett-Packard) Cloud Agile Partner. The company was based on Commercial Street, in the heart of the East London Tech City district, which is host to a large number of technology companies. == History == Carrenza was formed in 2001 as a consultancy by chief executive and founder Dan Sutherland. It began trading in 2004 and launched its first enterprise cloud computing platform in 2006, becoming one of the first companies in Europe to provide this type of hosting service. In 2009, it formed a partnership with Comic Relief and its affiliated campaigns Red Nose Day Sport Relief to provide IT infrastructure services to the charity, an arrangement that has won industry recognition. In 2013 it launched its first overseas services, with a mainland Europe cloud node based in Amsterdam. == Partnerships and customers == Carrenza had formed partnerships with a range of IT providers. It was one of the first companies in Europe to become a HP Cloud Agile partner., using HP blade servers and HP 3PAR SAN technology to power its cloud computing services. The company's products also use VMware vCloud IaaS tools and it is taking part in the VMware lighthouse initiative helping develop the next generation of VMware products and services. Other technology companies that Carrenza has worked closely with include Cisco, for enterprise security and loadblancing services, and Oracle. The company was the first to deploy Oracle Database 11g stretched RAC in production. It has also won two Oracle partner awards, including a Special Recognition award for its work with Comic Relief. The company has also been recognised by the UK IT Industry, receiving awards in 2009 for Community Project of the Year and in 2010 for best small business project for its Monopoly City Streets Work. Other companies that have partnered with Carrenza for their cloud-based IT services include Age UK, Haymarket Media Group, the World Wide Fund for Nature, Royal Bank of Scotland, eBay and Cineworld. == Accreditations == Carrenza's services are accredited for their compliance with several key international IT security and quality standards. These include: ISO27001:2005, Information Security Management System for all Carrenza services. UK Government G-Cloud, Carrenza has been awarded a place on the UK government's G-Cloud iii framework as an Infrastructure as a Service provider.
Zero-shot learning
Zero-shot learning (ZSL) is a problem setup in deep learning where, at test time, a learner observes samples from classes which were not observed during training, and needs to predict the class that they belong to. The name is a play on words based on the earlier concept of one-shot learning, in which classification can be learned from only one, or a few, examples. Zero-shot methods generally work by associating observed and non-observed classes through some form of auxiliary information, which encodes observable distinguishing properties of objects. For example, given a set of images of animals to be classified, along with auxiliary textual descriptions of what animals look like, an artificial intelligence model which has been trained to recognize horses, but has never been given a zebra, can still recognize a zebra when it also knows that zebras look like striped horses. This problem is widely studied in computer vision, natural language processing, and machine perception. == Background and history == The first paper on zero-shot learning in natural language processing appeared in a 2008 paper by Chang, Ratinov, Roth, and Srikumar, at the AAAI'08, but the name given to the learning paradigm there was dataless classification. The first paper on zero-shot learning in computer vision appeared at the same conference, under the name zero-data learning. The term zero-shot learning itself first appeared in the literature in a 2009 paper from Palatucci, Hinton, Pomerleau, and Mitchell at NIPS'09. This terminology was repeated later in another computer vision paper and the term zero-shot learning caught on, as a take-off on one-shot learning that was introduced in computer vision years earlier. In computer vision, zero-shot learning models learned parameters for seen classes along with their class representations and rely on representational similarity among class labels so that, during inference, instances can be classified into new classes. In natural language processing, the key technical direction developed builds on the ability to "understand the labels"—represent the labels in the same semantic space as that of the documents to be classified. This supports the classification of a single example without observing any annotated data, the purest form of zero-shot classification. The original paper made use of the Explicit Semantic Analysis (ESA) representation but later papers made use of other representations, including dense representations. This approach was also extended to multilingual domains, fine entity typing and other problems. Moreover, beyond relying solely on representations, the computational approach has been extended to depend on transfer from other tasks, such as textual entailment and question answering. The original paper also points out that, beyond the ability to classify a single example, when a collection of examples is given, with the assumption that they come from the same distribution, it is possible to bootstrap the performance in a semi-supervised like manner (or transductive learning). Unlike standard generalization in machine learning, where classifiers are expected to correctly classify new samples to classes they have already observed during training, in ZSL, no samples from the classes have been given during training the classifier. It can therefore be viewed as an extreme case of domain adaptation. == Prerequisite information for zero-shot classes == Naturally, some form of auxiliary information has to be given about these zero-shot classes, and this type of information can be of several types. Learning with attributes: classes are accompanied by pre-defined structured description. For example, for bird descriptions, this could include "red head", "long beak". These attributes are often organized in a structured compositional way, and taking that structure into account improves learning. While this approach was used mostly in computer vision, there are some examples for it also in natural language processing. Learning from textual description. As pointed out above, this has been the key direction pursued in natural language processing. Here class labels are taken to have a meaning and are often augmented with definitions or free-text natural-language description. This could include for example a wikipedia description of the class. Class-class similarity. Here, classes are embedded in a continuous space. A zero-shot classifier can predict that a sample corresponds to some position in that space, and the nearest embedded class is used as a predicted class, even if no such samples were observed during training. == Generalized zero-shot learning == The above ZSL setup assumes that at test time, only zero-shot samples are given, namely, samples from new unseen classes. In generalized zero-shot learning, samples from both new and known classes, may appear at test time. This poses new challenges for classifiers at test time, because it is very challenging to estimate if a given sample is new or known. Some approaches to handle this include: a gating module, which is first trained to decide if a given sample comes from a new class or from an old one, and then, at inference time, outputs either a hard decision, or a soft probabilistic decision a generative module, which is trained to generate feature representation of the unseen classes—a standard classifier can then be trained on samples from all classes, seen and unseen. == Domains of application == Zero shot learning has been applied to the following fields: image classification semantic segmentation image generation object detection natural language processing computational biology abstract reasoning